Archive

Archive for the ‘Six Sigma Project’ Category

The Effects of Employee Conflict on a Six Sigma Project

June 29th, 2010 admin 1 comment

The Effects of Employee Conflict on a Six Sigma Project

Every organization copes with internal staff-related conflict. Sometimes, employees are entrenched within well-worn habits and approach any notion of change warily. Other times, department heads might struggle to maintain – or even usurp – control from each other. Still others are embroiled in company politics, vying for the spotlight and willing to sacrifice organization-wide goals in the process. Each of these dynamics represents a challenge to the success of a Six Sigma project.

While many people believe that Six Sigma is entirely focused upon analyzing data and quantifying inputs, it expands much further. It recognizes the importance for open communication between all workplace staff. It encourages active participation from employees, including coordinating information flow between departments. Below, I’ll explain how employee conflict can impact the deployment of a Six Sigma initiative. We’ll explore the effects of staff resistance to change, company politics, and even personality conflicts.

Resisting Change

It’s not uncommon for employees to grow accustomed to a certain way of doing their jobs. There’s a feeling of security and familiarity that grows over the years. The problem is that most processes are riddled with inherent inefficiencies, many of which are all but invisible to the staff. The purpose of a Six Sigma project is to identify inefficiencies and bring about change to a given process. That promise of the initiative can cause an organization’s staff to dread its implementation. After all, any level of change suggests that they’ll be forced to venture outside their comfort zones.

It’s the responsibility of the project team to communicate the goals of the initiative. That includes getting the top management to “buy in” and openly convey their support as well as communicating with employees at every level within the organization. Most people fear change in the workplace because it introduces uncertainty. The Six Sigma team can help dispel that uncertainty and reduce staff resistance to the project through open communication.

Organization Politics

Encouraging staff participation introduces another challenge. Each person – including those on the project team – will have opinions regarding the best path to implementation. Opinions should be encouraged, of course; often, they can yield surprisingly insightful solutions. That said, employees within an organization will occasionally take that opportunity to secure some level of control of the project.

Existing company politics can exacerbate this problem. For example, department managers who crave the spotlight can actually impede a successful Six Sigma deployment by causing delays and resisting steps to implementation. Gaining the support of a company’s top level of management (including the CEO) is critical to navigating these political struggles while deploying the initiative.

Personality Conflicts

Besides resistance to process change and organization politics, some employees will simply not get along with others. Some will avoid working with those against whom they hold grudges; some will passively sabotage the efforts of others. Personality conflicts are common in all organizations. But, they can severely impact a Six Sigma project. The success of the project depends largely on staff participation and communication. That often requires the coordination of efforts between those who might otherwise not work well together.

Personality conflicts among the staff can only be managed, not resolved, by the Six Sigma team. This is another challenge in which having the unwavering support of top management can be crucial. In most cases, the clear expression of expectations from top managers will supercede the conflicts that exist between individual employees.

Successful Deployment

Every initiative will confront some level of staff conflict. It may manifest as a strong resistance to process change, existing office politics, or personality differences. In each case, the project team must openly communicate the goals of the initiative with all employees throughout an organization. They must also gain the resolute support of the top managers. In doing so, the Six Sigma team will be better able to manage the conflicts that they’re certain to confront.

BMGI, a leading education and consulting firm in the black belt six sigma education field regularly posts information on six sigma at http://www.bmgi.com

How to Select Six Sigma Projects?

June 27th, 2010 admin No comments

How to Select Six Sigma Projects?

Selecting Six Sigma Projects?

Focusing effort and resources to deliver maximum benefits to the organisation

Choosing the right six sigma projects is key to the success of an organization in terms of delivery of business objectives, business plan strategies and development opportunities for the workforce.

However, there is a cost associated to running six sigma projects that isn’t always captured or even considered when an organization embarks on six sigma.

Choosing the right projects is crucial to the credibility of six sigma and its’ ability to live within the bounds of its’ own philosophies by being efficient and cost effective with the resources it employs.

Any organization embarking on a strategy that includes Six Sigma as it’s methodology for improvement should ask itself one question, “What do I want to improve within my business”.

This might seem like a straight forward question but for many businesses, the answer to this question can determine whether Six Sigma is going to be successful or fall by the wayside like some other improvement initiatives. To understand the requirement and deliverables for Six Sigma the organization should listen to TWO VOICES.

1) Voice of the Customer (VOC)

This is the more powerful of the two voices in question as customers are the reason why we are in business. Many projects are initiated as a response to a particular customer requirement or complaint.

2) Voice of the Business (VOB)

Although not as powerful as the Voice of The Customer, projects or initiatives that are initiated from within the business tend to start from either a need to improve efficiency, reduce cost or ultimately to respond to a historical customer requirement or problem.

Where both of these two voices meet is through the link to the direct outputs of the process. The outputs of any process are produced to satisfy a requirement. If the output is to an external customer then it should satisfy the Voice of the Customer. If the output is to an internal customer, then it should satisfy the Voice of the Business.

In understanding the requirements from these two voices, we have clear direction on the types of projects we should be delivering within the organization within which we work.

The vast majority of Six Sigma Projects, particularly when talking about

DMAIC Six Sigma projects will fall into one of the following three categories.

1) Cost Saving

Where the case for the project is focused around reducing bottom line costs within the business, that are directly attributable to Profit and Loss account cost indicators.

2) Efficiency Improvement

The case for this type of project is based around process improvement, linked to either cycle time improvement (achieved through the use of Lean Sigma tools and techniques) or reductions in process variation (achieved through the use of DMAIC six Sigma) which ultimately lead to increased right first time yield

3) Revenue / Sales Growth

The case for these projects is focused around significant shifts in sales growth based on improving product and service to the customer.

Any project selected should look to improve the performance of the process or processes under investigation against at least one of the above performance indicators. The ultimate test of a project is in its ability to deliver benefits in all 3 areas. Ensuring that the benefits achieved satisfy all 3 performance indicators will inevitably lead huge benefits for the organization.

Any sustainable six sigma initiative relies upon a steady flow of projects to Six Sigma Black Belts. A list of initial project ideas should be collected either from within the business, or from the senior management team to resolve particular business issues. These projects should then be reviewed against criteria set by the business to give a prioritised list of projects.

Project teams should be clearly tasked with a realistic benefits target at the outset of the project. This benefits target should look to satisfy or fulfill one or more specific business objectives and should be measurable against one or more of the performance indicators identified above. The reality of this benefits target can then be confirmed once data around the baseline performance has been obtained.

Selection of six sigma projects relies upon a clear understanding of the business objectives, a management team that supports the assignment of internal resources to deliver the projects, and more importantly than anything else, a clearly defined business case and benefits statement that details the objectives of the project in terms of deliverables.

Projects teams are a hidden cost to the business so it is vital that the solutions generated by these teams have real impact that is tangible and highly visible. The benefits achieved by these projects should more than cover the cost of any six sigma resources within the first year, with exponential increases in benefits over the forthcoming years.

David (Lean and Six Sigma Black Belt specialist) has over 25 years of running and managing businesses and extensive experience of both commercial/sales and operational/production functions. David supports clients with a wide range of business issues and provides a high value added service. For latest news view SigmaPro – Lean Six Sigma Training News Portal

Categories: Six Sigma Project Tags: , ,

SDDC’s first Lean Six Sigma project completed.(ITV: in transit visibility: transportation and logistics news in brief)(Military Surface Deployment and Distribution Command): An article from: Translog

June 27th, 2010 admin No comments

SDDC’s first Lean Six Sigma project completed.(ITV: in transit visibility: transportation and logistics news in brief)(Military Surface Deployment and Distribution Command): An article from: Translog

 SDDCs first Lean Six Sigma project completed.(ITV: in transit visibility: transportation and logistics news in brief)(Military Surface Deployment and Distribution Command): An article from: Translog

This digital document is an article from Translog, published by U.S. Military Traffic Management Command on June 22, 2008. The length of the article is 424 words. The page length shown above is based on a typical 300-word page. The article is delivered in HTML format and is available immediately after purchase. You can view it with any web browser.

Citation Details
Title: SDDC’s first Lean Six Sigma project completed.(ITV: in transit visibility: transportation and logistics news in bri

buynow big SDDCs first Lean Six Sigma project completed.(ITV: in transit visibility: transportation and logistics news in brief)(Military Surface Deployment and Distribution Command): An article from: Translog

List Price: $ 9.95

Price: $ 9.95

Powered by Yahoo! Answers